Netgear WC7600v2 – ProSAFE Wireless Controller User Manual
Hardware Descriptions
25
ProSAFE Wireless Controller
Figure 9. Product label WC9500
LED Functions (All Models)
The function of each LED is described in the following table. These LEDS apply to all models
except where noted otherwise.
except where noted otherwise.
Table 5. LED functions for all models
LED
Status
Description
Power LED
Solid green
The wireless controller is on.
Off
The wireless controller is off.
If the power LED is not lit when the wireless controller is on,
check the connections and check to see if the power outlet is
controlled by a wall switch that is turned off (see
check the connections and check to see if the power outlet is
controlled by a wall switch that is turned off (see
Status LED
Solid yellow
The wireless controller is initializing. After approximately two
minutes, when the wireless controller completes its
initialization, the Status LED turns solid green. If the Status
LED remains solid yellow, the initialization failed (see
minutes, when the wireless controller completes its
initialization, the Status LED turns solid green. If the Status
LED remains solid yellow, the initialization failed (see
Solid green
The wireless controller completed its initialization successfully.
The Status LED is solid green during normal operation.
The Status LED is solid green during normal operation.
Off
The wireless controller is not receiving power.
Blinking yellow
Firmware is being upgraded.
Fan LED
Solid green
The fans are functioning correctly.
Solid yellow
One or more fans are not functioning correctly.