Netgear WC7600v2 – ProSAFE Wireless Controller User Manual
Maintain the Wireless Controller and Access Points
255
ProSAFE Wireless Controller
A dialog box displays, showing the file name of the backup file. The backup file is in the
following format: backup.tgz.
6.
To save the configuration file, follow the instructions of your browser.
Restore the Configuration File
Restore only settings that were backed up from your model wireless controller. (You cannot
restore settings that were backed up from another model wireless controller.)
restore settings that were backed up from another model wireless controller.)
To restore the configuration file from a backed-up file:
1.
Open a web browser, and in the browser’s address field, type the wireless controller’s IP
address.
address.
By default, the IP address is 192.168.0.250.
The wireless controller’s login window opens.
2.
Enter your user name and password.
3.
Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
page.
page.
4.
Select Maintenance > Backup/Restore.
The Backup/Restore page displays.
5.
Click the Browse button.
6.
Navigate to the saved configuration file.
WARNING:
When you click the Apply button to restore the configuration file, do
not try to go online, turn off the wireless controller, shut down the
computer, or do anything else to the wireless controller until the
wireless controller finishes rebooting. When the Status LED turns
green, wait a few more seconds before you do anything.
not try to go online, turn off the wireless controller, shut down the
computer, or do anything else to the wireless controller until the
wireless controller finishes rebooting. When the Status LED turns
green, wait a few more seconds before you do anything.
7.
Click the Apply button.
The configuration file is loaded onto the wireless controller, and the wireless controller
reboots.
reboots.