Netgear WC7600v1 - ProSAFE Wireless Controller User Manual

Select Configuration > System > Time. 

Configure the settings as described in the following table.

Click the Apply button.

Your settings are saved.

You can manage the IP address, VLAN settings, and link aggregation (LAG) settings of the 
wireless controller.

Management VLANs are used for all SNMP and HTTP traffic to and from the wireless 
controller and managed access points.

For large deployments, we recommend that the wireless controller and access points are in 
separate VLANs to ensure uninterrupted connectivity between the wireless controller and the 
access points.

Time Zone

From the menu, select the local time zone for your country or region.

Current Time

This field is a nonconfigurable field that displays the current time at your 
location.

NTP Client

Select the Enable radio button to use a Network Time Protocol (NTP) server to 
synchronize the clock of the wireless controller and managed access points. 

Select the Disable radio button if you do not want to use an NTP server.

Use Custom NTP Server

Select the Use Custom NTP Server check box if you want to use an alternate 
NTP server. By default, the NETGEAR NTP server is used.

Hostname/IP Address

Enter the host name or IP address of the NTP server, if you are using a custom 
NTP server.