Netgear WC7600v1 - ProSAFE Wireless Controller User Manual

Under normal circumstances, you do not need to reboot an access point. If a problem occurs 
with an access point, you can reboot it to see if this resolves the problem.



Open a web browser, and in the browser’s address field, type the wireless controller’s IP 
address.

By default, the IP address is 192.168.0.250.

The wireless controller’s login window opens.

Enter your user name and password.

Click the Login button.

The wireless controller’s web management interface opens and displays the Summary 
page.

Select Maintenance > Reboot/Reset > Access Points. 

To find the access point that you want to reboot, in the Search field, enter the IP address, 
MAC address, model, or name of the access point, or enter other information to narrow 
down the information that is displayed in the table.

The table displays only the access point or access points that match the information that 
you entered in the Search field.

Take one of the following actions:

Select a single access point by selecting the check box to the right of the access 
point.

Make a selection of access points by selecting the check boxes to the right of the 
access points.

Select all access points by selecting the check box in the upper right of the table 
heading.

Click the Reboot button.

The selected access point or access points are rebooted.