Netgear WC7600v1 - ProSAFE Wireless Controller User Manual
Manage Stacking and Redundancy
288
ProSAFE Wireless Controller
Select Which Wireless Controller in a Stack to Configure
After you add one or more wireless controllers to the stack, most pages of the web management
interface display a controller selection menu at the top. This menu lets you select the wireless
controller that you want to configure.
controller that you want to configure.
Figure 18. Controller selection menu with three wireless controllers in stack
In the previous figure, Self indicates the wireless controller that you are configuring through the
web management interface. Self is shown in orange font. The two IP addresses (172.16.192.31
and 172.16.192.32) indicate the other wireless controllers in the stack. These IP addresses are
shown in white font. A selected controller is shown in orange font. Other controllers in the stack
that are not selected are shown in white font.
web management interface. Self is shown in orange font. The two IP addresses (172.16.192.31
and 172.16.192.32) indicate the other wireless controllers in the stack. These IP addresses are
shown in white font. A selected controller is shown in orange font. Other controllers in the stack
that are not selected are shown in white font.
The following procedure is an example of how to select a wireless controller in a stack to
configure the basic radio on/off settings. After you select a wireless controller to configure,
this selection carries through to other pages of the web management interface until you select
to configure another wireless controller in the stack.
configure the basic radio on/off settings. After you select a wireless controller to configure,
this selection carries through to other pages of the web management interface until you select
to configure another wireless controller in the stack.
To select a wireless controller for configuration in a stack with two controllers:
1.
Open a web browser, and in the browser’s address field, type the wireless controller’s IP
address.
address.
By default, the IP address is 192.168.0.250.
The wireless controller’s login window opens.
2.
Enter your user name and password.
3.
Click the Login button.
The wireless controller’s web management interface opens and displays the Summary
page.
page.
4.
Select Configuration > Wireless > Basic > Radio On/Off.