Netgear WC7600v1 - ProSAFE Wireless Controller User Manual

The following table describes the fields of the Client Details pop-up window.

Click the OK button.

The Client Details pop-up window closes, and the Local Client List page displays again.

You can monitor all clients that were denied access to the network by all wireless controllers in 
the network.

Monitoring of blacklisted clients is supported on models WC7600 and 
WC9500 but not on models WC7500 and WC7600v2. 

MAC

The MAC address of the WiFi client.

Access Point

The name of the access point to which the WiFi client is connected.

BSSID

The MAC address of the access point’s radio to which the WiFi client is 
connected.

SSID

The WiFi network SSID that the WiFi client is using to connect to the access 
point.

Frequency

The channel frequency that the WiFi client is using to connect to the access 
point.

Auth

The security mode that the WiFi client is using to connect to the access 
point (Open, WEP, WPA, WPA2, or WPA/WPA2).

Client Type

The wireless mode that the WiFi client is using to connect to the access 
point (802.11ng, 802.11bg, 802.11b, 802.11ac, 802.11na, or 802.11a).

Cipher

The type of encryption that the WiFi client is using (None, WEP, AES, TKIP, 
or TKIP + AES).

AID

The association ID of the client.

RSSI

The received signal strength indicator (RSSI) of the WiFi client.

Tx Power

The transmit power of the WiFi client.

Tx Rate

The transmit rate in Mbps of the WiFi client.

Tx Bytes

The number of bytes that the WiFi client transmitted.

Rx Rate

The receive rate in Mbps of the WiFi client.

Rx Bytes

The number of bytes that the WiFi client received.

Tx packets

The number of packets that the WiFi client transmitted.

Rx Packets

The number of packets that the WiFi client received.