Netgear WC7600v1 - ProSAFE Wireless Controller User Manual

In the IP Settings section, select the DHCP client disable radio button.

The fields become available. By default, the DHCP client enable radio button is selected 
and the access point functions as a DHCP client.

In the IP Settings sections, configure the IP address information for the access point in the 
network.

In the Controller Settings section, configure the IP address for the wireless controller in the 
network.

If you need to change the management VLAN settings, do so in the Vlan Settings section.

By default, VLAN 1 is the management VLAN and it is untagged, that is, the Untagged 
VLAN check box is selected and the Untagged VLAN field also states VLAN ID 1. You 
can specify a different VLAN ID for the management VLAN and the tagged or untagged 
VLAN.

Click the Apply button.

You changes are saved. You must let the wireless controller rediscover the access point 
in the network (see 

By default, a controller-managed access point functions as a DHCP client. If you disabled the 
DHCP client, for example, because the access point required a static IP address setting, you 
can reenable the DHCP client and allow the DHCP server in your network to assign an IP