Netgear WC7500 - ProSAFE® Wireless Controller User Manual

Click the Apply button.

Your settings are saved.

During initial setup, you entered your country and region in the General Settings page (see 

wireless controller determined the best WiFi settings for the discovered access points and 
pushed these settings to your managed access points. 

Typically, the default WiFi settings do not need adjustment. Override the WiFi settings only if 
a specific need exists, such as when the settings that a device vendor specifies are different 
from the default settings. You can configure WiFi settings for the basic profile group and for 
advanced profile groups (see 

Two requirements exist for you to be able to configure the WiFi settings on the Basic 
Wireless Settings page:

You must disable automatic channel allocation for the radio on the Channel Allocation 
page. For information about channel allocation, see 

At least one access point must be assigned to the profile group for the radio for which you 

want to configure the WiFi settings.



Open a web browser, and in the browser’s address field, type the wireless controller’s IP 
address.

By default, the IP address is 192.168.0.250.

The wireless controller’s login window opens.

Enter your user name and password.

Click the Login button.

The wireless controller’s web management interface opens and displays the Summary 
page.

Select Configuration > Wireless > Basic > Wireless.