Netgear WC7500 - ProSAFE® Wireless Controller User Manual

For each profile on a WiFi radio in the selected profile group, specify the rate limit as a 
percentage. 

You can drag the sliders to adjust the values in the Rate Limit fields to the right of the 
sliders. Make sure that the total percentages of all profiles on one WiFi radio in the 
selected profile group do not exceed 100 percent.

Click the Apply button.

Your settings are saved.

This feature is supported for access point models WN370, WAC720, 
WAC730, and WAC740 only.

You can manage the LED behavior of WN370, WAC720, WAC730, and WAC740 access 
points by enabling all LEDs (which is the default setting), by enabling the Power LED only, or 
by disabling all LEDs. You can configure a different setting for each model access point that 
supports management of the LED behavior.

This feature is useful if an access point is installed in a hotel guest room and you want to 
make sure that guests are not disturbed by the blue light of the LEDs.

You can manage the LED behavior of WN370, WAC720, WAC730, and WAC740 access 
points that support the basic profile group.



Open a web browser, and in the browser’s address field, type the wireless controller’s IP 
address.

By default, the IP address is 192.168.0.250.

The wireless controller’s login window opens.

Enter your user name and password.

Click the Login button.

The wireless controller’s web management interface opens and displays the Summary 
page.

Select Configuration > Profile > Basic > AP LED State.