Netgear WNDAP350 – ProSAFE Dual Band Wireless-N Access Point User Manual

Guard Interval. From the pull-down menu, select the desired guard interval. The 
guard interval protects from interference from other transmissions. The default is 

Auto.

Output Power. From the pull-down menu, select the transmit power of the access 
point. The options are Full, Half, Quarter, Eighth, and Minimum. Decrease the 
transmit power if two or more APs are close together and use the same channel 
frequency. The default is Full. (The transmit power may vary depending on the local 
regulatory regulations. 

Click Apply to save your 802.11b/bg/ng wireless settings.



From the main menu under Configuration, select Wireless, and then select the 
802.11a/na tab. The Wireless Settings screen for your 11a/na access point displays as 
shown in 

 below.

Configure the Wireless LAN settings based on the following field descriptions:

Wireless Mode. Select the desired wireless operating mode. Only 802.11a/na 
wireless modes can be selected from this menu. The default is 11na. The options are:

11a. All 802.11a wireless stations can be used.

11na. All 11a and 11na wireless stations can be used. This is the default.

If you select one of these options and if other settings on this screen 
are disabled, then you must select the Turn Radio On radio button to 
enable available options on this screen.