Netgear WNDAP350 – ProSAFE Dual Band Wireless-N Access Point User Manual

Wi-Fi Multimedia (WMM) is enabled by default. Select the Disable radio button to disable 
WMM support.

WMM Power Save is enabled by default. Select the Disable radio button to disable WMM 
power save.

Click Apply to save your settings

Follow the instructions below to set up and test basic wireless connectivity. Once you have 
established basic wireless connectivity, you can enable security settings appropriate to your 
needs.



From your Web browser, log in to the WNDAP350 using its default address of 
http://192.168.1.1. Use the default user name of admin and default password of 
password or use a new LAN address and password if you have set them up.

From the main menu under Configuration, select System. Verify that the correct 
Country/Region in which the wireless interface will operate has been selected.

Click Apply to save any changes.

Under the Configuration tab, select Wireless from the main menu, and then select your 
network, either the Wireless Settings 11b/bg/ng or Wireless Settings 11a/na. Ensure that the 
auto channel (default) feature is selected for your network. This feature selects a channel 
that has the least interference.

It should not be necessary to change the wireless channel unless you notice interference 
problems or are near another wireless access point. Select a channel that is not being 
used by any other wireless networks within several hundred feet of your wireless access 
point.