Netgear WNDAP350 – ProSAFE Dual Band Wireless-N Access Point User Manual

You can setup or modify the RADIUS Server settings to compliment Network Authentication 
security options. The RADIUS Server must be used with Legacy 802.1x, and can be used 
with WPA and WPA2 Network Authentication. When using a RADIUS Server, the RADIUS 
Server settings must be configured before completing the Network Authentication security 
profile (see 

implementing these security options). 

The RADIUS Server Settings apply to all profiles. They only need to 
be configured once per wireless access point.



From your Web browser, log in to the WNDAP350 using the default LAN address of 
http://192.168.1.1, user name admin and password password, or use the LAN address 
and password that you set up.

Under the Configuration tab, select Security on the main menu, select Advanced from the 
left panel, and then select RADIUS Server Settings. The RADIUS Server Settings screen 
displays, as shown in 

.

Enter the following RADIUS Server settings:

Authentication Server. This configuration is required for authentication using a 
RADIUS Server. The IP Address, Port Number, and Shared Secret are required for 
communication with the Primary RADIUS Server. You can also configure a 
Secondary RADIUS Server to use, if the Primary RADIUS Server fails.

IP Address. The IP address of the RADIUS Server.