Netgear STM300 ProSecure Web and Email Threat Management Appliance Reference Manual
Chapter 3. Performing Network and System Management
|
61
ProSecure Web/Email Security Threat Management (STM) Appliance
Internet. The settings on the HTTP Proxy screen affect Web category filtering, distributed
spam analysis, and software updates.
spam analysis, and software updates.
To configure the HTTP proxy:
1.
Select Global Settings > HTTP Proxy from the menu. The HTTP Proxy screen
displays:
displays:
Figure 37.
2.
Select the check box and complete the fields as explained in the following table:
3.
Click Apply to save your settings.
About Users with Administrative and Guest Privileges
There are two predefined user types that can access the STM’s Web Management Interface:
•
Administrator. A user who has full access and the capacity to change the STM
configuration (that is, read/write access). The default user name for an administrator is
admin, and the default password for an administrator is password.
admin, and the default password for an administrator is password.
Table 17. HTTP Proxy Settings
Setting
Description (or Subfield and Description)
HTTPS Proxy Settings
Use a Proxy Server to
Connect to the Internet
Connect to the Internet
If computers on the network connect to the Internet via a proxy server, select the
Use a Proxy Server to Connect to the Internet check box to specify and enable
a proxy server. Enter the following settings:
Use a Proxy Server to Connect to the Internet check box to specify and enable
a proxy server. Enter the following settings:
Proxy Server
The IP address and port number of the proxy server.
User Name
The user name for proxy server authentication.
Password
The password for proxy server authentication.