Netgear UTM25 – ProSECURE Unified Threat Management (UTM) Appliance User Manual
Configure a NETGEAR VPN Gateway
124
NETGEAR ProSAFE VPN Client
The Local column displays the local LAN IP address and subnet mask, both of which you
must use later to configure the VPN Client.
must use later to configure the VPN Client.
Edit a VPN Policy
To be able to edit a VPN policy, you must disable it.
To edit a VPN policy:
1.
Access the router’s web management interface.
For information about how to do this, see the documentation that came with your router.
In this example, the Router Status page displays.
2.
Select VPN > IPSec VPN > VPN Policies.
3.
Select the check box for the policy.
4.
Click the Disable button.
The VPN policy is disabled.
5.
In the Action column for the selected policy, click the Edit button.
The Edit VPN Policy page displays. The appearance of this page depends on the router
model.
model.
Note:
From this page, you can change the local IP address and the subnet
mask settings.
mask settings.
6.
Modify the VPN policy.
7.
Click the Apply button.
The VPN Policies page displays.
8.
Select the check box for the policy.
9.
Click the Enable button.
The VPN policy is reenabled.