Netgear UTM150 – ProSECURE Unified Threat Management (UTM) Appliance User Manual
Configure VPN Tunnels
37
NETGEAR ProSAFE VPN Client
2.
In the VPN Tunnel Tree pane, right-click the name of the IKE configuration.
The Authentication page displays.
3.
Click the Advanced tab.
4.
Select the X-Auth Popup check box.
For you to configure hybrid mode, you must select this check box.
5.
Select the Hybrid Mode check box.
6.
Select Configuration > Save or press Ctrl + S.
Your settings are saved.
Configure IPSec Settings
The purpose of the IPSec configuration, which is also referred to as phase 2, is to negotiate
the IP security settings that are applied to the traffic that goes through the tunnels.
the IP security settings that are applied to the traffic that goes through the tunnels.
Note:
On NETGEAR routers, the IPSec configuration is referred to as VPN
settings.
settings.
You can create several phase 2 configurations for a single set of phase 1 settings. For
information about how to specify scripts, see
information about how to specify scripts, see
51.
This example assumes that the client is connecting to a VPN gateway.
To create an IPSec configuration:
1.
On the client computer desktop, double-click the VPN Client shortcut
.
The VPN Configuration page displays.
2.
In the VPN Tunnel Tree pane, right-click the authentication phase name.