Netgear M7300-24XF (XSM7224S) - ProSAFE 24-port, 10 Gigabit Stackable L2+ Managed Switch User Manual
Chapter : Managing Device Security
|
387
ProSafe® XSM7224S 10G Managed Stackable Switch Software Administration Manual
•
SSH-2 DSA Key PEM File
- SSH-2 Digital Signature Algorithm (DSA) Key File (PEM
Encoded)
2.
Use Transfer Mode to specify the protocol to use to transfer the file:
•
TFTP
- Trivial File Transfer Protocol
•
SFTP
- Secure File Transfer Program
•
SCP
- Secure Copy
3.
Use Server Address Type to specify either IPv4 or IPv6 to indicate the format of the
TFTP/SFTP/SCP Server Address field. The factory default is IPv4.
4.
Use Server Address to enter the IP address of the server in accordance with the format
indicated by the Server Address Type. The factory default is the IPv4 address 0.0.0.0.
5.
Use Remote File Name to enter the name on the TFTP server of the file you want to
download. You may enter up to 32 characters. The factory default is blank.
6.
Click APPLY to start to download the Host Key file. Note that to download SSH key files
SSH must be administratively disabled and there can be no active SSH sessions.
Telnet
To display the Telnet page, click Security
Access > Telnet
.