Netgear M7300-24XF (XSM7224S) - ProSAFE 24-port, 10 Gigabit Stackable L2+ Managed Switch Leaflet

Use this command to configure a rule for a valid IP address and MAC address combination 
used in ARP packet validation.

permit ip host sender-ip mac host sender-mac

Use this command to delete a rule for a valid IP and MAC combination.

no permit ip host sender-ip mac host sender-mac

Use this command to display the Dynamic ARP Inspection global configuration and 
configuration on all the VLANs. With the vlan-list argument (i.e. comma separated VLAN 
ranges), the command displays the global configuration and configuration on all the VLANs in 
the given VLAN list. The global configuration includes the source mac validation, 
destination mac validation and invalid IP validation information.

show ip arp inspection [vlan <vlan-list>]

Example: The following shows example CLI display output for the command.

(Switch) #show ip arp inspection vlan 10-12

ARP Access-list Config

ARP Access-list Config

• Privileged EXEC

• User EXEC

Displays whether Source MAC Validation of ARP frame is enabled or disabled.

Displays whether Destination MAC Validation is enabled or disabled.

Displays whether IP Address Validation is enabled or disabled.

The VLAN ID for each displayed row.

Displays whether DAI is enabled or disabled on the VLAN.

Displays whether logging of invalid ARP packets is enabled on the VLAN.

The ARP ACL Name, if configured on the VLAN.

If the ARP ACL is configured static on the VLAN.