Netgear M7300-24XF (XSM7224S) - ProSAFE 24-port, 10 Gigabit Stackable L2+ Managed Switch Leaflet

For set-cos-transmit an 802.1p priority value is required and is specified as an integer from 
0-7.

police-simple {<1-4294967295> <1-128> conform-action {drop | 

This command is the two-rate form of the police command and is used to establish the 
traffic policing style for the specified class. For each outcome, the only possible actions are 
drop, set-cos-as-sec-cos, set-cos-transmit, set-sec-cos-transmit, set-dscp-transmit, 
set-prec-transmit, or transmit. In this two-rate form of the police command, the conform 
action defaults to send, the exceed action defaults to drop, and the violate action defaults to 
drop. These actions can be set with this command once the style has been configured.

This command establishes a new DiffServ policy. The <policyname> parameter is a 
case-sensitive alphanumeric string from 1 to 31 characters uniquely identifying the policy. 
The type of policy is specific to the inbound traffic direction as indicated by the in parameter

The CLI mode is changed to Policy-Map Config when this command 

is successfully executed.

Policy-Class-Map Config

Drop, Mark (all forms)

police-two-rate {<1-4294967295> <1-128> <1-4294967295> <1-128> 

conform-action {drop | set-cos-as-sec-cos | set-cos-transmit <0-7> 

| set-sec-cos-transmit <0-7> | set-prec-transmit <0-7> | 

set-dscp-transmit <0-63> | transmit} exceed-action {drop | 

set-cos-as-sec-cos | set-cos-transmit <0-7> | set-sec-cos-transmit 

<0-7> | set-prec-transmit <0-7> | set-dscp-transmit <0-63> | 

transmit} violate-action {drop | set-cos-as-sec-cos | 

set-cos-transmit <0-7> | set-sec-cos-transmit <0-7> | 

set-prec-transmit <0-7> | set-dscp-transmit <0-63> | transmit}} 

Policy-Class-Map Config

policy-map <policyname> [in|out]

Global Config