Netgear M7300-24XF (XSM7224S) - ProSAFE 24-port, 10 Gigabit Stackable L2+ Managed Switch Leaflet

Use this command to enable Telnet connections to the system and to enable the Telnet 
Server Admin Mode. This command opens the Telnet listening port. 

ip telnet server enable

Use this command to disable Telnet access to the system and to disable the Telnet Server 
Admin Mode. This command closes the Telnet listening port and disconnects all open Telnet 
sessions. 

no ip telnet server enable

Use this command to establish a new outbound Telnet connection to a remote host. The host 
value must be a valid IP address or host name. Valid values for port should be a valid decimal 
integer in the range of 0 to 65535, where the default value is 23. If [debug] is used, the 
current Telnet options enabled is displayed. The optional line parameter sets the outbound 
Telnet operational mode as ‘linemode’ where, by default, the operational mode is ‘character 
mode’. The noecho option disables local echo.

telnet <ip-address|hostname> <port> [debug] [line] [noecho]

Use this command to regulate new Telnet sessions. If enabled, new Telnet sessions can be 
established until there are no more sessions available. An established session remains active 
until the session is ended or an abnormal network error ends the session.

If the Telnet Server Admin Mode is disabled, Telnet sessions cannot 

be established. Use the ip telnet server enable command to 
enable Telnet Server Admin Mode.

enabled

Privileged EXEC

Privileged EXEC

• Privileged EXEC

• User EXEC