Netgear M7300-24XF (XSM7224S) - ProSAFE 24-port, 10 Gigabit Stackable L2+ Managed Switch Leaflet
Management Commands
577
ProSafe Managed Switch
ip ssh
Use this command to enable SSH access to the system. (This command is the short form of
the ip ssh server enable command.)
the ip ssh server enable command.)
Default
Format
ip ssh
Mode
ip ssh protocol
Use this command to set or remove protocol levels (or versions) for SSH. Either SSH1 (1),
SSH2 (2), or both SSH 1 and SSH 2 (1 and 2) can be set.
SSH2 (2), or both SSH 1 and SSH 2 (1 and 2) can be set.
Default
Format
ip ssh protocol [1] [2]
Mode
ip ssh server enable
Use this command to enable the IP secure shell server.
Default
Format
ip ssh server enable
Mode
no ip ssh server enable
Use this command to disable the IP secure shell server.
Format
no ip ssh server enable
Mode
sshcon maxsessions
Use this command to specify the maximum number of SSH connection sessions that can be
established. A value of 0 indicates that no ssh connection can be established. The range is 0
to 5.
established. A value of 0 indicates that no ssh connection can be established. The range is 0
to 5.
Default
Format
sshcon maxsessions <0-5>
Mode
disabled
Privileged EXEC
1 and 2
Privileged EXEC
disabled
Privileged EXEC
Privileged EXEC
5
Privileged EXEC