Netgear M7300-24XF (XSM7224S) - ProSAFE 24-port, 10 Gigabit Stackable L2+ Managed Switch Leaflet

Use this command to strengthen the security of the switch by locking user accounts that have 
failed login due to wrong passwords. When a lockout count is configured, a user that is 
logged in must enter the correct password within that count. Otherwise the user will be locked 
out from further switch access. Only a user with read/write access can re-activate a locked 
user account. Password lockout does not apply to logins from the serial console. The valid 
range is 1-5. The default is 0, or no lockout count enforced.

passwords lock-out <1-5>

Use this command to set the password lock-out count to the default value.

no passwords lock-out

Use this command to enable the password strength feature. It is used to verify the strength of 
a password during configuration.

passwords strength-check

Use this command to disable the password strength-check.

no passwords strength-check

Use this command to enforce a minimum number of uppercase letters that a password 
should contain. The valid range is 0-16. The default is 2. Minimum of 0 means no restriction 
on that set of characters.

Global Config

0

Global Config

Global Config

Disable

Global Config

passwords strength minimum uppercase-letters