Netgear M7300-24XF (XSM7224S) - ProSAFE 24-port, 10 Gigabit Stackable L2+ Managed Switch Leaflet
Switching Commands
79
ProSafe Managed Switch
no switchport protected (Global Config)
Use this command to remove a protected port group. The groupid parameter identifies the
set of protected ports. Use the name keyword to remove the name from the group.
set of protected ports. Use the name keyword to remove the name from the group.
Format
NO switchport protected <groupid> name
Mode
switchport protected (Interface Config)
Use this command to add an interface to a protected port group. The <groupid> parameter
identifies the set of protected ports to which this interface is assigned. You can only configure
an interface as protected in one group.
identifies the set of protected ports to which this interface is assigned. You can only configure
an interface as protected in one group.
Note:
Port protection occurs within a single switch. Protected port
configuration does not affect traffic between ports on two different
switches. No traffic forwarding is possible between two protected
ports.
switches. No traffic forwarding is possible between two protected
ports.
no switchport protected (Interface Config)
Use this command to configure a port as unprotected. The groupid parameter identifies the
set of protected ports to which this interface is assigned.
set of protected ports to which this interface is assigned.
Format
no switchport protected <groupid>
Mode
Format
switchport protected <groupid> name <name>
Mode
Global Config
Global Config
Default
unprotected
Format
switchport protected <groupid>
Mode
Interface Config
Interface Config