Netgear M4300-12X12F (XSM4324S) - Stackable Managed Switch with 24x10G including 12x10GBASE-T and 12xSFP+ Layer 3 User Manual
Getting Started
18
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
Software Requirements for Using the Web Interface
To access the switch by using a web browser, the browser must meet the following software
requirements:
requirements:
•
Microsoft Internet Explorer 10 or 11
•
Microsoft Edge 25
•
Google Chrome 44 or 45
•
Mozilla Firefox 40 or 40.6.01
•
Opera 26, 29, or 31
•
Apple Safari on OS X 9.0
Note:
Other and later versions might work too but were not tested.
The Device View is based on HTML version 5
Use a Web Browser to Access the Switch and Log In
If this is the first time that you log in to the switch and you must use the default IP address of
the switch, see the information in the installation guide for your switch and in the M4200 and
M4300 Series ProSAFE Managed Switches Software Setup Manual.
the switch, see the information in the installation guide for your switch and in the M4200 and
M4300 Series ProSAFE Managed Switches Software Setup Manual.
You can use a web browser to access the switch and log in. You must be able to ping the IP
address of the management interface or out-of-band (OOB) port from your computer for web
access to be available.
address of the management interface or out-of-band (OOB) port from your computer for web
access to be available.
IMPORTANT:
The procedures in this manual assume that you know the IP
address of your switch.
address of your switch.
To access the switch over the web management interface:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.