Netgear M4300-12X12F (XSM4324S) - Stackable Managed Switch with 24x10G including 12x10GBASE-T and 12xSFP+ Layer 3 User Manual
Multicast Routing
435
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
Configure the IPv6 PIM Interface
To configure the IPv6 PIM interface:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Routing
> IPv6 Multicast > IPv6 PIM > Interface Configuration.
6.
Use one of the following methods to select an interface:
•
In the Go To Interface field, enter the interface in the unit/slot/port format and click on
the Go button.
the Go button.
•
Next to the Interface column, select the check box for the interface that you want to
configure.
configure.
7.
In the Admin Mode field, select Enable or Disable.
This sets the administrative status of PIM-SM in the router. The default is Disable.
8.
In the Hello Interval field, enter the time in seconds between the transmission of PIM hello
messages on this interface.
The valid values are from 0 to 18000. The default value is 30.
9.
In the Join/Prune Interval field, enter the frequency at which PIM Join/Prune messages are
transmitted on this PIM interface.
The valid values are from 0 to 18000. The default value is 60.
10.
In the BSR Border field, select the Enable or Disable option to set the bootstrap router
(BSR) border status on the selected interface.
11.
Enter the DR Priority for the selected interface.
The valid values are from 0 to 2147483647. The default value is 1.
12.
Click the Apply button.