Netgear M4100-50-POE (FSM7250Pv1h1) - 48‐port FE + 2 GE Combo L2 Managed PoE Switch Software Guide
Switching Commands
150
M4100 Series ProSAFE
Managed
Switches
no ip arp inspection limit
Use this command to set the rate limit and burst interval values for an interface to the default
values of 15 pps and 1 second, respectively.
values of 15 pps and 1 second, respectively.
ip arp inspection filter
Use this command to configure the ARP ACL used to filter invalid ARP packets on a list of
comma-separated VLAN ranges. If you enter the static keyword, packets that do not
match a permit statement are dropped without consulting the DHCP snooping bindings.
comma-separated VLAN ranges. If you enter the static keyword, packets that do not
match a permit statement are dropped without consulting the DHCP snooping bindings.
no ip arp inspection filter
Use this command to unconfigure the ARP ACL used to filter invalid ARP packets on a list of
comma-separated VLAN ranges.
comma-separated VLAN ranges.
arp access-list
Use this command to create an ARP ACL.
no arp access-list
Use this command to delete a configured ARP ACL.
Format
no ip arp inspection limit
Mode
Interface Config
Default
No ARP ACL is configured on a VLAN
Format
ip arp inspection filter <acl-name> vlan <vlan-list> [static]
Mode
Global Config
Format
no ip arp inspection filter <acl-name> vlan <vlan-list> [static]
Mode
Global Config
Format
arp access-list <acl-name>
Mode
Global Config
Format
no arp access-list <acl-name>
Mode
Global Config