Netgear M4100-50-POE (FSM7250Pv1h1) - 48‐port FE + 2 GE Combo L2 Managed PoE Switch Software Guide
Utility Commands
330
M4100 Series ProSAFE
Managed
Switches
boot host auto-save
This command is used to enable automatically saving the downloaded configuration on the
switch.
switch.
no boot host auto-save
This command is used to disable automatically saving the downloaded configuration on the
switch.
switch.
boot autoinstall start
The command is used to start Auto Install on the switch. Auto Install tries to download a
config file from a TFTP server.
config file from a TFTP server.
boot autoinstall stop
The command is used to A user might terminate the Auto Install process at any time prior to
the downloading of the config file. This is most optimally done when the switch is
disconnected from the network, or if the requisite configuration files have not been configured
on TFTP servers. Termination of the Auto Install process ends further periodic requests for a
host-specific file.
the downloading of the config file. This is most optimally done when the switch is
disconnected from the network, or if the requisite configuration files have not been configured
on TFTP servers. Termination of the Auto Install process ends further periodic requests for a
host-specific file.
boot host retry-count
This command is used to set the number of attempts to download a configuration. The valid
range is from 1 to 6.
range is from 1 to 6.
Default
Disabled
Format
boot host auto-save
Mode
Privileged EXEC
Format
no boot host auto-save
Mode
Privileged EXEC
Format
boot autoinstall start
Mode
Privileged EXEC
Format
boot autoinstall stop
Mode
Privileged EXEC
Default
3
Format
boot host retry-count <count>
Mode
Privileged EXEC