Netgear M4100-50-POE (FSM7250Pv1h1) - 48‐port FE + 2 GE Combo L2 Managed PoE Switch Software Guide

Use this command to remove the authentication at login.

The command creates an accounting method list. This list is identified by the default 
keyword or by a user-specified <list-name>. Accounting records, when enabled for a 
line-mode, can be sent at both the beginning and at the end (start-stop) or only at the end 
(stop-only). If none is specified, accounting is disabled for the specified list. If tacacs is 
specified as the accounting method, accounting records are notified to a TACACS+ server. If 
radius

 is the specified accounting method, accounting records are notified to a RADIUS 

server.

For the same set of accounting type and list name, the administrator can change the record 
type or the methods list without having to first delete the previous configuration.

Note the following:

A maximum of five accounting method lists can be created for each exec and commands 

type. 

The same list-name can be used for both exec and commands accounting type.

AAA accounting for commands with RADIUS as the accounting method is not supported.

Format

no aaa authentication dot1x default 

Mode

Global Config

Format

aaa accounting {exec | commands} {default | <list-name>} {start-stop 

| stop-only | none} <method1> [<method2>…]

Mode

Global Config

exec

Provides accounting for user EXEC terminal sessions.

commands

Provides accounting for all user-executed commands.

default

The default list of methods for accounting services.

<list-name>

Character string used to name the list of accounting methods.

start-stop

Sends a start accounting notice at the beginning of a process and a stop 
accounting notice at the end of a process.

stop-only

Sends a stop accounting notice at the end of the requested user process.

none

Disables accounting services on this line.

<method1> 

[<method2>…]

Use either tacacs or radius for accounting purpose.