Netgear S3300-28X (GS728TX) - ProSAFE S3300 Smart Switch Series Installation Guide

Installation

•  NETGEAR ProSAFE Smart Switch S3300-28X, S3300-52X, S3300-

28X-PoE+, or S3300-52X-PoE+

•  Rubber footpads for tabletop installation
•  AC power cord
•  19-inch rack-mount kit for rack installation
•  Resource CD

S3300-28X, S3300-52X, S3300-28X-PoE+, 
S3300-52X-PoE+

If you are using static IP addresses in your network you must configure the
switch with a static IP. If you are using DHCP server, you can skip the next
section.

¾

1.  Configure your computer with a static IP address in the 192.168.0.x

subnet.

2.  Connect your computer to a port on the switch using an Ethernet cable.
3.  In a browser, enter the default IP address of your switch,

192.168.0.239.
A login screen displays.

4.  Enter

password for the password.

5.  Select

System > Management > IP Configuration.

6.  Enter the static IP address you want to assign the switch.
7.  Click the

Apply button.

¾

1.  Cable a computer to an Ethernet port on the switch front panel.
2.  Power on the switch.
3.  Verify that the computer with the Smart Control Center Utility is on the

same subnet as the switch.

Use the Smart Control Center Utility included on the Resource CD ++to
configure the switch.

¾

1.  Double-click the Smart Control Center Utility icon on your desktop.

The Smart Control Center displays.

2.  Click the

Discover button.

The Smart Control Center Utility finds the switch and displays its MAC
address, IP address, and model number.

3.  Click the line for the switch that you want to configure.