Netgear FS728TLP – ProSAFE 24 ports smart switch PoE User Guide
Configure Spanning Tree Protocol
131
ProSAFE FS526Tv2, FS726Tv2, and FS728TLP Smart Switches
The CST Port Configuration screen displays. The following figure does not show all ports.
2.
Select whether to configure physical ports, link aggregation groups (LAGs), or both by
clicking one of the following links above the table heading:
clicking one of the following links above the table heading:
•
PORTS. Only physical ports display. This is the default setting.
•
LAGS. Only LAGs display.
•
All. Both physical ports and LAGs display.
3.
Select whether to configure a single port, a group of ports, or all ports (for the sake of
simplicity in this procedure, LAGs are also considered ports):
simplicity in this procedure, LAGs are also considered ports):
•
To configure a single port, select the check box next to the port that you want to
configure.
configure.
The information for the selected port displays in the menu in the table heading.
•
To configure a group of ports, select the check boxes for the individual ports that you
want to configure.
want to configure.
•
To configure all ports, select the check box at the left in the table heading.