Netgear RN31664E – ReadyNAS 316 6-Bay, 6x4TB Enterprise Drive Hardware Manual

If the status display screen is not lit, do the following:

Press the Power button on the front panel of the system.
The status display screen wakes.

Press the Power button a second time.
Instructions for graceful shutdown display on the status display screen.

Press the Power button a third time.
The system shuts down gracefully.

If the status display screen is lit, do the following:

Press the Power button on the front panel of the system.
Instructions for graceful shutdown display on the status display screen.

Press the Power button again.
The system shuts down gracefully.

Perform a forced shutdown only if the storage system is not responding.

Press and hold the Power button on the front panel of the system for five seconds.

The LEDs blink quickly and simultaneously to warn that power will be cut off forcibly.

The system shuts down.

Use the boot menu to restart or troubleshoot your ReadyNAS storage system. Your storage system has the
following boot modes:

Normal. Initiates a normal boot process, just like booting using the Power button.

Factory default. Initiates a short disk test that takes approximately 2 minutes. After the disk test, a
10-minute time-out period begins.

If you want to cancel the factory default process, power off the storage system before the 10-minute
time-out ends. The system powers down safely without causing any data loss.

If you want to reset the system to factory default settings, do not power off your system. After the
10-minute time-out period, the factory default process begins.