Netgear RNR4450 – RNR4450 2TB (4x500GB) ReadyNAS 1100 Dual Gigabit Rackmount Network Storage Software Guide
Manage Storage Space
20
ReadyNAS Duo, NV+, and 1100
5.
Highlight your system and click the Setup button.
The ReadyNAS Volume Setup screen displays.
6.
Select the Flex-RAID radio button.
If you do not pick a format within 10 minutes, your system reboots in the same mode that
it was previously using.
it was previously using.
7.
From the Select the desired RAID level drop-down list, select a RAID level.
If you select Auto, your ReadyNAS system automatically selects a RAID level based on
the number of disks that are installed in your system, as follows:
the number of disks that are installed in your system, as follows:
Number of installed disks
RAID level automatically selected
1
RAID 1
2
3
RAID 5
4
8.
Click the Next button.
You are prompted to confirm the volume creation command.
9.
Confirm the command.
The volume is formatted. This can take quite a while, depending on the size of your hard
disk drives.
disk drives.
10.
(Optional) Restore any backed-up data and settings.
For more information about restoring files, see
Create a Volume
You can create up to four data volumes. Each disk can have up to two data partitions.
To create a volume:
1.
From the FrontView main menu, select Volumes > Volume Settings.
2.
If it is not already selected, click the Add Volumes tab.
3.
Select the check box to the left of each disk that you want to include in the RAID set.
4.
From the Select RAID level drop-down list, select a RAID level.