Netgear RNR4450 – RNR4450 2TB (4x500GB) ReadyNAS 1100 Dual Gigabit Rackmount Network Storage Hardware Manual
Disks
28
ReadyNAS Duo and NV+
3.
Slide the disk tray back into the system, and press the handle to secure the disk.
The volume automatically synchronizes with the new disk in the background. This might
take several hours, depending on the disk size. You can continue to use your ReadyNAS,
although access is slower until the volume synchronization finishes. You are notified by
email when the process is complete.
take several hours, depending on the disk size. You can continue to use your ReadyNAS,
although access is slower until the volume synchronization finishes. You are notified by
email when the process is complete.
If you are adding disks to a diskless system, see the ReadyNAS RAIDiator 4.1 Software
Manual, which is available at
Manual, which is available at
, for information
about using RAIDar to discover your system on your local area network for the first time.
Failed Disk Notification
If a disk fails, you are notified by email. Email alerts need to be set up for notifications to be
sent. In addition, ReadyNAS FrontView provides information about the failed disk.
sent. In addition, ReadyNAS FrontView provides information about the failed disk.
NETGEAR recommends replacing a failed disk with the same disk model. Use ReadyNAS
FrontView to determine the disk vendor and model used in your system.
FrontView to determine the disk vendor and model used in your system.
For information about setting up email alerts and using ReadyNAS FrontView, see the
ReadyNAS RAIDiator 4.1 Software Manual, which is available at
ReadyNAS RAIDiator 4.1 Software Manual, which is available at
http://www.readynas.com/documentation
.
WARNING!
No matter how many hard drives are installed in your system,
ensure that all disk trays remain in the drive bays to maintain
adequate airflow.
ensure that all disk trays remain in the drive bays to maintain
adequate airflow.