Netgear M4300-52G-PoE+ (GSM4352PA) - 48x1G PoE+ Stackable Managed Switch with 2x10GBASE-T and 2xSFP+ (550W PSU) User Manual
Configure Switching Information
192
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
The Operational Status field displays the current operational status of each interface.
6.
Use one of the following methods to select an interface:
•
In the Go To Interface field, enter the interface in the unit/slot/port format and click on
the Go button.
the Go button.
•
Next to the Interface column, select the check box for the interface that you want to
configure.
configure.
7.
In the Auto VoIP Mode field, select Disable or Enable.
Auto-VoIP is disabled by default.
8.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
Add a New Entry to the OUI Table
To add a new entry to the OUI table:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Switching > Auto-VoIP > OUI-based > OUI Table.