Netgear M4300-52G-PoE+ (GSM4352PA) - 48x1G PoE+ Stackable Managed Switch with 2x10GBASE-T and 2xSFP+ (550W PSU) User Manual
Configure Switching Information
229
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
•
Enable
or Disable the Proxy Querier Mode for the specified VLAN ID. If proxy
querier mode is disabled, then IGMP proxy query with source IP 0.0.0.0 is not
sent in response to an IGMP leave packet. The default is Enable.
sent in response to an IGMP leave packet. The default is Enable.
c.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
7.
To disable IGMP snooping on a VLAN, do the following:
a.
Select the check box next to the VLAN ID.
b.
Click the Delete button.
The VLAN is removed from the list.
8.
To modify the IGMP snooping settings for a VLAN:
a.
Select the check box next to the VLAN ID
b.
Update the values
c.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
Configure a Multicast Router
You can configure the interface as the one the multicast router is attached to. All IGMP
packets snooped by the switch are forwarded to the multicast router reachable from this
interface. The configuration is not needed most of the time since the switch automatically
detects the multicast router and forwards IGMP packets accordingly. It is needed only if you
want to make sure that the multicast router always receives IGMP packets from the switch in
a complex network.
packets snooped by the switch are forwarded to the multicast router reachable from this
interface. The configuration is not needed most of the time since the switch automatically
detects the multicast router and forwards IGMP packets accordingly. It is needed only if you
want to make sure that the multicast router always receives IGMP packets from the switch in
a complex network.
To configure a multicast router:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Switching
> Multicast > IGMP Snooping > Multicast Router Configuration.