Netgear M4300-52G-PoE+ (GSM4352PA) - 48x1G PoE+ Stackable Managed Switch with 2x10GBASE-T and 2xSFP+ (550W PSU) User Manual
Configure Quality of Service
469
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
The Class Configuration page displays, showing the configuration fields for the class.
10.
To configure the class details, complete the fields:
•
Class Name
- The name for the configured DiffServ class.
•
Class Type
- The DiffServ class type.
You can select the class type only when you are creating a new class. After you
create the class, this field displays the class type, but you cannot change it.
create the class, this field displays the class type, but you cannot change it.
11.
Define the criteria to associate with a DiffServ class:
•
Match Every
. This adds to the specified class definition a match condition whereby all
packets are considered to belong to the class.
•
Reference Class
. Select this option to reference another class for criteria. The match
criteria defined in the reference class is as match criteria in addition to the match
criteria you define for the selected class. After selecting this option, the classes that
can be referenced are displayed. Select the class to reference. A class can reference
at most one other class of the same type.
criteria you define for the selected class. After selecting this option, the classes that
can be referenced are displayed. Select the class to reference. A class can reference
at most one other class of the same type.
•
Class of Service
. Select this option to require the Class of Service (CoS) value in an
Ethernet frame header to match the specified CoS value. This option lists all the
values for the Class of Service match criterion in the range 0 to 7 from which one can
be selected.
values for the Class of Service match criterion in the range 0 to 7 from which one can
be selected.
•
VLAN
. Select this option to require a packet’s VLAN ID to match a VLAN ID or a
VLAN ID within a continuous range. If you configure a range, a match occurs if a
packet’s VLAN ID is the same as any VLAN ID within the range. The VLAN value is in
the range of 0–4093.
packet’s VLAN ID is the same as any VLAN ID within the range. The VLAN value is in
the range of 0–4093.
•
Secondary Class of Service
. Select this option to require the secondary Class of
Service (CoS) value in an Ethernet frame header to match the specified secondary
CoS value.
CoS value.