Netgear M4300-8X8F (XSM4316S) - Stackable Managed Switch with 16x10G including 8x10GBASE-T and 8xSFP+ Layer 3 User Manual

is common. Many nodes require ingress traffic to be tagged with a specific VLAN ID, and 
other nodes require egress traffic to be transmitted with a specific VLAN ID. With the use 
of MVRP on both ingress and egress, no manual VLAN configuration is required to pass 
tagged traffic through the network.

MRP framework must be available and enabled in all intermediate 
devices to ensure that the propagation of the attributes occurs 
throughout the network.

With MRP, network attributes are declared, registered, withdrawn, and removed 
completely dynamically without any user intervention. This dynamic nature is especially 
useful in networks where the following is true:

Network attributes are likely to change frequently, requiring reconfiguration of the 
intermediate devices.

Recipients of these attributes frequently increase or decrease in number. 

Each of these changes without a dynamic self-adjusting framework would require 
constant attention from the network administrator. 

You can configure global MRP settings for the switch. 



Launch a web browser.

Enter http://<ipaddress> in the web browser address field.

The login window opens.

Enter the user name and password. 

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.

Click the Login button. 

The System Information page displays.

Select Switching > MRP > Basic > MRP Configuration.