Netgear FVS318N – Prosafe Wireless N VPN Firewall Quick Setup Guide
Firewall Defaults, Public Server Rule, and Secondary WAN IP Address
6
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
3.
Configure the settings as explained in the following table. The fields that are not mentioned
are not required.
4.
Click Apply to save your changes. The new rule is added to the LAN WAN Rules screen
and is automatically enabled.
For More Information
Chapter 5, “Firewall Protection,” of the Reference Manual provides information about the
following security topics:
following security topics:
•
Overview of rules to block or allow specific kinds of traffic
•
Configuring LAN WAN rules
•
Configuring DMZ WAN rules
•
Configuring LAN DMZ rules
•
Configuring other firewall features
•
Services, bandwidth profiles, and QoS profiles
•
Configuring content filtering
•
Setting a schedule to block or allow specific traffic
•
Enabling source MAC filtering
•
Setting up IP/MAC bindings
•
Configuring port triggering
•
Configuring universal Plug and Play (UPnP)
Table 3. Screen settings for a adding secondary WAN IP address
#
Setting
Description
Service
From the drop-down list, select HTTP for a web server or FTP for
an FTP server.
an FTP server.
Action
From the drop-down list, select ALLOW always.
Send to Lan Server
From the drop-down list, Single Address.
Start (under Send to Lan Server) Type the IP address of the web or FTP server on your LAN.
WAN Destination IP Address
From the drop-down list, select Other Public IP Address for the
WAN interface.
WAN interface.
Start (under WAN Destination IP
Address)
Address)
Type the IP address of the secondary WAN address.
WAN Users
From the drop-down list, select Any.