Netgear FVS318N – Prosafe Wireless N VPN Firewall Leaflet

Wireless Profile Commands

This command configures a new wireless profile. After you have issued the dot11 profile 
add

 command, you enter the dot11-config [profile] mode, and then you can configure one 

keyword and associated parameter or associated keyword at a time in the order that you 
prefer. 

dot11

 <profile name>

ssid <ssid name>

dot11-config [profile]

broadcast-ssid {Y | N}

security_type {Open | WEP | WPA | WPA2 | WPA+WPA2}

vlan_profile <vlan name>

wep authentication {Automatic | Open-System | Shared-Key}

wep encryption {64-bit-WEP | 128-bit-WEP}

wep {passphrase {{1 | 2 | 3 | 4} <passphrase>} | wep key 

   {{1 | 2 | 3 | 4} <key>}}

wpa encryption {TKIP | CCMP | TKIP+CCMP}

wpa authentication {PSK {wpa wpa-password <password>} | RADIUS | 

   PSK+RADIUS {wpa wpa_password <password>}}

pre-authentication {Y | N}

enable_active_time {N | Y {start hour <hour>} {start meridiem  

   {AM | PM}} {start minute <minute>} {stop hour <hour>} 

   {stop meridiem {AM | PM}} {stop minute <minute>}}

wlan_partition {Y | N}

The wireless profile name (alphanumeric string).

The name of the 802.11 profile SSID.

 or N 

Enables or disables the SSID broadcast.