Netgear FVS318N – Prosafe Wireless N VPN Firewall Leaflet

This command configures an existing firewall custom service. After you have issued the 
security services edit

 command to specify the row to be edited, you enter the 

security-config [custom-service] mode, and then you can edit the service. You cannot change 
the service name.

security

security-config [custom-service]

, UDP, ICMP, or ICMPv6

Specifies the protocol type that applies to the service. 

For TCP and UDP, the start port number (integer) of the 
range used by the destination user. Valid numbers are from 
0 to 65535.

For TCP and UDP, the end port number (integer) of the 
range used by the destination user. Valid numbers are from 
0 to 65535.

The ICMP type (integer) used by the destination user.

, 

, 

, 

, or 

Specifies the type of QoS priority that applies to the service. 
The keywords are self-explanatory.

security services edit <row id>

protocol {TCP {start_port <number>} {finish_port <number>} | 

   UDP {start_port <number>} {finish_port <number>} | 

   ICMP {icmp_type <number> | ICMPv6 {icmp_type <number>}}

qos_priority {Normal-Service | Minimize-Cost |  

   Maximize-Reliability | Maximize-Throughput | Minimize-Delay}