Netgear FVS318N – Prosafe Wireless N VPN Firewall Reference Manual



99), click the Edit button 

in the Action column for the route that you want to modify. The Edit Static Route screen 
displays. This screen is identical to the Add Static Route screen (see the previous 
figure).

Modify the settings as described in the previous table.

Click Apply to save your settings.



On the Static Routing screen for IPv4 (see 

99), select the check box 

to the left of each route that you want to delete, or click the Select All table button to 
select all routes.

Click the Delete table button.

Routing Information Protocol (RIP), RFC 2453, is an Interior Gateway Protocol (IGP) that is 
commonly used in internal IPv4 networks (LANs). RIP enables a router to exchange its 
routing information automatically with other routers, to dynamically adjust its routing tables, 
and to adapt to changes in the network. RIP is disabled by default. RIP does not apply to 
IPv6.



Select Network Configuration > Routing. In the upper right of the screen, the IPv4 
radio button is selected by default. The Static Routing screen displays the IPv4 settings 
(see 

Click the RIP Configuration option arrow to the right of the Static Routing submenu tab. 
The RIP Configuration screen displays. (The following figure contains some examples.)