Netgear FVS318N – Prosafe Wireless N VPN Firewall Reference Manual
Firewall Protection
156
ProSAFE Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Create LAN DMZ Outbound Service Rules
You can change the default outbound policy or define rules that specify exceptions to the
default outbound policy. By adding custom rules, you can block or allow access based on the
service or application, source or destination IP addresses, and time of day. An outbound rule
can block or allow traffic between the DMZ and any internal LAN IP address according to the
schedule created on the Schedule screen.
default outbound policy. By adding custom rules, you can block or allow access based on the
service or application, source or destination IP addresses, and time of day. An outbound rule
can block or allow traffic between the DMZ and any internal LAN IP address according to the
schedule created on the Schedule screen.
IPv4 LAN DMZ Outbound Service Rules
To create an IPv4 LAN DMZ outbound rule:
1.
In the upper right of the LAN DMZ Rules screen, the IPv4 radio button is selected by default.
The screen displays the IPv4 settings (see
The screen displays the IPv4 settings (see
154).
Click the Add table button under the Outbound Services table. The Add LAN DMZ
Outbound Service screen for IPv4 displays:
Outbound Service screen for IPv4 displays:
Figure 78.
2.
Enter the settings as described in
132. In addition to selections from the
Service, Action, and Log drop-down lists, you need to make selections from the following
drop-down lists:
drop-down lists:
•
LAN Users
•
DMZ Users
Unless your selection from the Action drop-down list is BLOCK always, you also need to
make a selection from the following drop-down list:
make a selection from the following drop-down list:
•
Select Schedule