Netgear FVS318N – Prosafe Wireless N VPN Firewall Reference Manual

Virtual Private Networking Using IPSec and L2TP Connections

254

ProSAFE Wireless-N 8-Port Gigabit VPN Firewall FVS318N

Change the name of the authentication phase (the default is Gateway):

a. Right-click the authentication phase name.

b. Select Rename.

c. Type GW_ModeConfig.

d. Click anywhere in the tree list pane.

Note:

This is the name for the authentication phase that is used only for the

VPN client, not during IKE negotiation. You can view and change this name in
the tree list pane. This name needs to be a unique name.

The Authentication pane displays in the

Configuration Panel screen, with the

Authentication tab selected by default:

Figure 151.

Specify the settings that are described in the following table.

Table 59. VPN client authentication settings (Mode Config)

Setting

Description

Interface

Select Any from the drop-down list.

Remote Gateway

Enter the remote IP address or DNS name of the wireless VPN firewall. For example,
enter 192.168.15.175.

Preshared Key

Select the Preshared Key radio button. Enter the pre-shared key that you already
specified on the wireless VPN firewall. For example, enter H8!spsf3#JYK2!. Confirm
the key in the Confirm field.