Netgear FVS318N – Prosafe Wireless N VPN Firewall Reference Manual
LAN Configuration
96
ProSAFE Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Figure 48.
4.
Enter the settings as described in the following table:
Table 22. RADVD screen settings for the DMZ
Setting
Description
RADVD Status
Specify the RADVD status by making a selection from the drop-down list:
•
Enable. The RADVD is enabled, and the RADVD fields become available for you
to configure.
to configure.
•
Disable. The RADVD is disabled, and the RADVD fields are masked out. This is
the default setting.
the default setting.
Advertise Mode
Specify the advertisement mode by making a selection from the drop-down list:
•
Unsolicited Multicast. The wireless VPN firewall advertises unsolicited multicast
packets at a rate that is specified by the advertisement interval.
packets at a rate that is specified by the advertisement interval.
•
Unicast only. The wireless VPN firewall responds to unicast packet requests only.
No unsolicited packets are advertised. Select this option for nonbroadcast multiple
access (NBMA) links such as ISATAP.
No unsolicited packets are advertised. Select this option for nonbroadcast multiple
access (NBMA) links such as ISATAP.
Advertise Interval
Enter the advertisement interval of unsolicited multicast packets in seconds. The
minimum value is 10 seconds; the maximum value is 1800 seconds.
minimum value is 10 seconds; the maximum value is 1800 seconds.