Netgear FVS318v3 – Cable/DSL ProSafe VPN Firewall with 8-Port Switch Reference Manual
ProSafe VPN Firewall FVS318v3 Reference Manual
Sample VPN Configurations with FVS318v3
C-5
v5.0, January 2012
Activating the VPN Tunnel
You can activate the VPN tunnel by testing connectivity and viewing the VPN tunnel status
information as described in the following flowchart:
information as described in the following flowchart:
Figure C-4
All traffic from the range of LAN IP addresses specified on the router at Gateway A and the router
at Gateway B will now flow over a secure VPN tunnel.
at Gateway B will now flow over a secure VPN tunnel.
The FVS318v3-to-FVS318v3 Case
Table C-1. Policy Summary
VPN Consortium Scenario:
Scenario 1
Type of VPN
LAN-to-LAN or Gateway-to-Gateway
Security Scheme:
IKE with Preshared Secret/Key
Date Tested:
November 2004
Model/Firmware Tested:
NETGEAR-Gateway A
FVS318v3 with firmware version v3.0_14
NETGEAR-Gateway B
FVS318v3 with firmware version v3.0_14
IP Addressing:
Test Step 1
Ping Remote
LAN IP Address
Test Step 2
Ping Remote
WAN IP Address
Test Step 3
View VPN
Tunnel Status
Start
Fix the
Router Network
Fix the
VPN Tunnel
End
Fail
Pass
Fail
Pass
and then Retest
and then Retest