Netgear FVS318Gv2 – ProSAFE VPN Firewall Series User Manual
Advanced Settings
56
NETGEAR ProSAFE VPN Client
8.
Select the tunnel or tunnels to open automatically.
Tip:
If only one tunnel is configured, select the Automatically open this
tunnel when USB stick is inserted check box on the Advanced
IPSec page (see
tunnel when USB stick is inserted check box on the Advanced
IPSec page (see
45).
9.
Click the Next button.
The USB Mode Wizard 4/4 page displays. This page is a summary.
10.
Click the OK button.
The USB settings are saved. The VPN configuration and its associated security
information are now removed from the computer and copied onto the USB drive. The
VPN Client is now functioning in USB mode.
information are now removed from the computer and copied onto the USB drive. The
VPN Client is now functioning in USB mode.
When you remove the USB drive from the computer, the VPN configuration is reset, that is,
an empty configuration displays in the Configuration Panel. The next time that the VPN Client
starts when the USB drive that contains the VPN configuration is not inserted, the VPN
configuration is not present in the VPN Client.
an empty configuration displays in the Configuration Panel. The next time that the VPN Client
starts when the USB drive that contains the VPN configuration is not inserted, the VPN
configuration is not present in the VPN Client.
The VPN Client does not let you change the password or computer association that is on the
USB drive. However, you can export the VPN configuration to a local disk, remove the USB
drive, import the VPN configuration in the VPN Client, and start the USB Mode Wizard again
to specify a new password or a new association with a computer. For information about
importing and exporting, see
USB drive. However, you can export the VPN configuration to a local disk, remove the USB
drive, import the VPN configuration in the VPN Client, and start the USB Mode Wizard again
to specify a new password or a new association with a computer. For information about
importing and exporting, see
Configure Tunnels to Open Automatically with a USB Drive
After you enabled a USB drive with a VPN tunnel configuration, you can configure the VPN
Client to open the tunnel automatically when you insert the USB drive.
To enable a tunnel to open automatically when you insert a USB drive:
1.
On your desktop, double-click the VPN Client shortcut
.
The VPN Configuration page displays.
2.
In the VPN Tunnel Tree pane, click the IPSec configuration name of the tunnel.
The IPSec pane displays.