Netgear FVS318Gv2 – ProSAFE VPN Firewall Series Reference Manual
Firewall Protection
189
NETGEAR ProSAFE VPN Firewall FVS318G v2
3.
In the Custom IP Groups table to the right of the service that you want to edit, click the Edit
table button.
4.
Modify the settings that you wish to change.
5.
Click the Apply button.
Your changes are saved.
To delete a custom IP group:
1.
Log in to the unit:
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the Username field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
password. Leave the domain as it is (geardomain).
c. Click the Login button.
The Router Status screen displays. After five minutes of inactivity, which is the default
login time-out, you are automatically logged out.
login time-out, you are automatically logged out.
2.
Select Security > IP Groups.
The IP Groups screen displays.
3.
In the Custom IP Groups table, select the check box to the left of each custom IP group that
you want to delete or click the Select All table button to select all groups.
4.
To delete the selected profile or profiles, click the Delete table button.
The information is deleted.
Configure Content Filtering
To restrict access to certain sites on the Internet by internal LAN users, you can use the
content filtering and web component blocking features of the VPN firewall. By default, these
features are disabled; all requested traffic from any website is allowed. If you enable one or
more of these features and users try to access a blocked site, they see a “Blocked by
NETGEAR” message.
content filtering and web component blocking features of the VPN firewall. By default, these
features are disabled; all requested traffic from any website is allowed. If you enable one or
more of these features and users try to access a blocked site, they see a “Blocked by
NETGEAR” message.
Note:
Content filtering is supported for IPv4 users and groups only. Filtering
is limited to HTTP traffic. HTTPS traffic cannot be filtered.
is limited to HTTP traffic. HTTPS traffic cannot be filtered.