Netgear FVS318Gv2 – ProSAFE VPN Firewall Series Reference Manual
Virtual Private Networking Using IPSec and L2TP Connections
237
NETGEAR ProSAFE VPN Firewall FVS318G v2
2.
Select VPN > Connection Status.
The Active IPSec SA(s) table lists each active connection with the information that is
described in the following table.
described in the following table.
3.
To change the poll interval period, enter a new value in the Poll Interval field, and click the
Set Interval button.
The default poll interval is 10 seconds.
4.
To stop polling, click the Stop button.
View the VPN Firewall IPSec VPN Log
To display the IPSec VPN log:
1.
Log in to the unit:
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the Username field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
password. Leave the domain as it is (geardomain).
Table 49. IPSec VPN Connection Status screen information
Item
Description
Policy Name
The name of the VPN policy that is associated with this SA.
Endpoint
The IP address on the remote VPN endpoint.
Tx (KB)
The amount of data that is transmitted over this SA.
Tx (Packets)
The number of IP packets that are transmitted over this SA.
State
The status of the SA. Phase 1 is the authentication phase, and Phase 2 is key
exchange phase. If no connection exists, the status is IPSec SA Not Established.
exchange phase. If no connection exists, the status is IPSec SA Not Established.
Action
Click the Connect table button to build the connection, or click the Disconnect table
button to terminate the connection.
button to terminate the connection.