Netgear FVS318Gv2 – ProSAFE VPN Firewall Series Reference Manual
Network and System Management
338
NETGEAR ProSAFE VPN Firewall FVS318G v2
The SNMP screen displays.
3.
In the upper right of the screen, click the SNMP System Info option arrow.
4.
Enter the settings as described in the following table:
5.
Click the Apply button.
Your changes are saved.
Manage the Configuration File
The configuration settings of the VPN firewall are stored in a configuration file on the VPN
firewall. This file can be saved (backed up) to a computer, retrieved (restored) from the
computer, cleared to factory default settings, or upgraded to a new version.
firewall. This file can be saved (backed up) to a computer, retrieved (restored) from the
computer, cleared to factory default settings, or upgraded to a new version.
Once the VPN firewall is installed and works correctly, make a backup of the configuration file
to a computer. If necessary, you can later restore the VPN firewall settings from this file.
to a computer. If necessary, you can later restore the VPN firewall settings from this file.
The Backup & Restore Settings screen lets you do the following:
•
Back up and save a copy of the current settings (see
•
Restore saved settings from the backed-up file (see
•
Revert to the factory default settings (see
•
Update the firmware (see
Table 76. SNMP SysConfiguration screen settings
Setting
Description
SysContact
Enter the SNMP system contact information that is available to the SNMP manager.
This setting is optional.
This setting is optional.
SysLocation
Enter the physical location of the VPN firewall. This setting is optional.
SysName
Enter the name of the VPN firewall for SNMP identification purposes. The default
name is FVS318N.
name is FVS318N.