Netgear FVS318Gv2 – ProSAFE VPN Firewall Series Reference Manual
IPv4 and IPv6 Internet and Broadband Settings
52
NETGEAR ProSAFE VPN Firewall FVS318G v2
in the IPv4-translated address for IPv6 devices to enable communication between IPv4-only
devices on the VPN firewall’s LAN and IPv6-only devices on the WAN.
devices on the VPN firewall’s LAN and IPv6-only devices on the WAN.
To configure SIIT:
1.
Log in to the unit:
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.
a. In the address field of any of the qualified web browsers, enter https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the Username field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
password. Leave the domain as it is (geardomain).
c. Click the Login button.
The Router Status screen displays. After five minutes of inactivity, which is the default
login time-out, you are automatically logged out.
login time-out, you are automatically logged out.
2.
Select Network Configuration > SIIT.
3.
Select the Enable SIIT check box.
4.
In the SIIT Address fields, enter the IPv4 address to be used in the IPv4-translated
address for IPv6 devices.
5.
Click the Apply button.
Your changes are saved.
Configure Advanced WAN Options and Other Tasks
The advanced options include configuring the maximum transmission unit (MTU) size, port
speed, and VPN firewall’s MAC address, and setting a rate limit on the traffic that is being
forwarded by the VPN firewall.
speed, and VPN firewall’s MAC address, and setting a rate limit on the traffic that is being
forwarded by the VPN firewall.
Although you can access the Broadband Advanced Options screen only through the
Broadband ISP Settings (IPv4) screen, the advanced options apply to both IPv4 and IPv6
WAN connections.
Broadband ISP Settings (IPv4) screen, the advanced options apply to both IPv4 and IPv6
WAN connections.
To configure advanced WAN options:
1.
Log in to the unit: