Netgear FVS318Gv2 – ProSAFE VPN Firewall Series Reference Manual

Page of 422
LAN Configuration 
99
 NETGEAR ProSAFE VPN Firewall FVS318G v2
Enable DHCP Server Select the Enable DHCP Server radio button to enable the VPN firewall to function 
as a Dynamic Host Configuration Protocol (DHCP) server, providing TCP/IP 
configuration for all computers connected to the VLAN. Enter the following settings:
Domain Name
This setting is optional. Enter the domain name of the VPN 
firewall.
Start IP
Enter the start IP address. This address specifies the first of 
the contiguous addresses in the IP address pool. Any new 
DHCP client joining the LAN is assigned an IP address 
between this address and the end IP address. The default IP 
address 176.16.2.100. 
End IP
Enter the end IP address. This address specifies the last of the 
contiguous addresses in the IP address pool. Any new DHCP 
client joining the LAN is assigned an IP address between the 
start IP address and this IP address. The default IP address 
176.16.2.254.
Note:
The start and end DHCP IP addresses must be in the 
same network as the LAN TCP/IP address of the VPN firewall 
(that is, the IP address in the DMZ Port Setup section as 
described earlier in this table).
Primary DNS 
Server
This setting is optional. If an IP address is specified, the VPN 
firewall provides this address as the primary DNS server IP 
address. If no address is specified, the VPN firewall provides 
its own LAN IP address as the primary DNS server IP address.
Secondary DNS 
Server
This setting is optional. If an IP address is specified, the VPN 
firewall provides this address as the secondary DNS server IP 
address.
WINS Server
This setting is optional. Enter a WINS server IP address to 
specify the Windows NetBIOS server, if one is present in your 
network.
Lease Time
Enter a lease time. This specifies the duration for which IP 
addresses are leased to clients.
DHCP Relay
To use the VPN firewall as a DHCP relay agent for a DHCP server somewhere else 
in your network, select the DHCP Relay radio button. Enter the following setting:
Relay Gateway
The IP address of the DHCP server for which the VPN firewall 
serves as a relay.
Table 18.  DMZ Setup screen settings for IPv4 (continued)
Setting
Description